| Subject | Text |
| If you are lucky only the Fuse is blow.
Close to the power connector inside the nootebook is A SM |
| Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
|
|
| on the small sub board in the psu replace the small electrolytic capacitors as they have fallen in v |
| Same 27R410T Problem | I am having the same problem on the same RCA model 27R410T. It worked fine until this morning. We tu |
| New IC RS2004FS | New IC RS2004FS HK7x.00/pcs;LA6508 HK1x.00/pcs;or GAMECUBE Screwdriver HK1x.00/pcs...;Please Contact |
| Radio and electronics cookbook | I have just built the Colt 80m receiver from the book. It worked ok when i tested the VFO and Mixer |
| Sony ST JX411 | I have a Sony am\fm tuner that has lost it's battery power to hold the station presets in memory.
|
| Diana needs help about NCS2001 amp | Hello,
Can anyone help me on my little project herein. I'm using an rail-to-rail operational sub-1 |
| I think your TXT and OSD are OK.
Check/replace these components in the ABL-line, 2x SMD-zenerdiod |
| Re: HP SMPS dead | You need 2 resistors smd 0,3 ohm. Cut last 5 cm cable /output/ and conect. |
| Sony KV-X2982U | When I try to switch my Sony KV-X2982U from stanby mode, the red light goes and comes back immediate |
| sony dvp-s330 shuts off will not run/work | Have an older sony model #dvp-S330 dvd player.
It will not work. Push power button on remote or pl |
| Schematic / Manual. Sanyo Phone CLT - 6700. | Hi it would be very helpful if somebody would give me a copy of the schematic for Sanyo Cordless tel |
| Sears vcr tuner fades to unclear | I have a sears vcr (30152). When you use the tuner to select a station, it is clear for a second and |
| I've obtained four DTV boxes. Two are different models from one company. I've experimented with thre |
| Hello,
i found something: there is an irish site offering the Q330 transistor which is obviously re |
| [quote:78255ff566="gary"]daewoo say sustain panel has to be replaced as an item!!!!!!! also it often |
|
|
| The KD-28DL10U is a FE-2D chassis, 9 times out of 10 on any FE-2x chassis's i look at to repair with |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| Thanks vtech,
yeah, I had thought that Lxx would denote an inductor of some sort though I thought |
| Re soldering PROM IC Q710 on DSP board was a typical fix for various brands/models. For whatever rea |
| Coming from a board manufacturing background I can tell you that in many cases, the use of BGA's (Ba |
| Sony SA3ES tuner display not working | I would very grateful for any information or diagrams regarding the SONY SA3ES tuner. The unit itse |
| [quote:115222e2ca="jts1957"]What is "stucked mode?"
What is "text channel?"
|
| Thanks the problem was somewhere at the smd i change all the kit from philips and its ok now |
| The model & the "fishy" smell are very much typical of the SMD capacitor leakage that |
| Re: Please help : My Panasonic television isn't well at all! | [quote:a0ee332b43="ArthurLee"]About 3 weeks ago, my Panasonic TV started to switch to standby mode q |
| Ok, thanks and sorry about the attitude. I'll try to locate these Ic's and see if I can handle it. I |
| Hitachi tv's | Most models of that era have a Known fault of the Regulater IC going dry joint. Pads are very small |
| FOUND: Executech, DigiTech, HoTelephone, Americom manuals | Looks like I posted this in the wrong place first, moderator, please ignore or remove from ther othe |